3F induced polarization transmitter (IPT) is suitable for being used to transmit in time domain IP method
It can supply AB electrode with square waves of the positive direction
Power off and reverse direction
With a duty ratio of 1:1 which has periods of 8 to 16 inches
With outside controller
The device can be matched with microprocessor induced polarization instrument (MIPI)
The supply period is controlled by the MIPI
The transmitter has advanced circuit design, light, small size, large PWR and has a wide range of working current, from mA level to maximum 5A, suitable for different measures
The transmitter offer commutation power supply to adapt to gasoline generator
Main technical specification:
Three steps of transmitting periods: 8 to 16 seconds, external control with MIPI
Power supply ammeter gauge maximum value: 5A
The power source in the device is 6V to 5mAh accumulator dispensing with maintenance
Which should be charged when the power source voltage is lower than the red line
Note: Not all certifying agents offer online lookup, and some have a lag time for posting new certificates. If you are unable to find a certificate online, contact the certification agency or supplier for further verification.
){kind=link}